Roche Accu-Chek Active Uživatelský manuál stáhnout pdf (Strana 39)

Analysing test results on the PC

To turn the meter o, unplug the

USB connector from the meter

once the data transfer is

complete.

For approximately 3 seconds,

is displayed.

The meter turns itself o.

The meter is supplied with

electricity via the USB cable

while it is connected to the

computer. Nonetheless, there

must be a battery in the meter.

If the transfer is unsuccessful

If the test results are not transferred ( is still ﬂashing on the display), the meter turns itself o

automatically after approx. 90 seconds. There can be dierent reasons for a failed transfer. Eliminate the

cause and start the transfer again.

Check

• if both USB connectors are properly inserted.

• if the USB cable is damaged (e.g. kinks in the cable).

• if all device drivers necessary for communication between the diabetes management software and the

meter are installed.

• if your diabetes management software is compatible with the Continua standard. You can tell by this

logo:

man_06658768001_01_EN.indb 37 04.04.2013 09:13:26

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 69 70

Žádné komentáře

Roche Accu-Chek Active Uživatelský manuál Strana 39